Compare alpinestars s-r7 graphic motorcycle helmet - a-core gloss red / white, l (59-60cm), red/white products from over 5,000 stores
shopistic.com
Search...
United Kingdom
United Kingdom
Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white
Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white
Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white
Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white
1 of 2

Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white

The Alpinestars S-R7 Graphic Motorcycle Helmet provides full-face head protection for road journeys and track riding. Its pre-preg multi-composite shell, size-specific multi-density EPS liner, patented impact-management technologies, aerodynamic profile and adjustable ventilation system give you a secure fit, controlled airflow and clear visibility.The following features explain how the helmet's construction supports your protection, comfort and concentration:Pre-preg multi-composite shell: Layers of carbon fibre, aramid fibre and fibreglass are pre-impregnated with epoxy resin before being formed into the shell, creating a consistent material structure that gives you penetration resistance, radial strength and controlled energy distribution.Carbon fibre construction: Carbon fibres provide high tensile strength within the shell structure, helping the helmet manage impact loads while maintaining a size-medium weight of approximately 1,390 g.Aramid fibre reinforcement: Aramid fibres are incorporated into the composite lay-up to support tear resistance and help maintain the shell's structural integrity when exposed to concentrated impact forces.Fibreglass shell layers: Fibreglass sections add controlled flexibility to the shell, allowing impact energy to spread across the outer structure before reaching the internal EPS liner.Size-specific outer shells: The shell dimensions are matched to the relevant helmet sizes, helping you achieve suitable external proportions, internal padding thickness and weight distribution around your head.Seven-piece EPS liner: The impact liner consists of seven individual EPS sections arranged around the helmet, allowing each area to perform a defined role in absorbing and distributing impact energy.Six-density EPS construction: Six different EPS densities are positioned according to the expected impact loads in each area, giving you targeted energy absorption around the front, sides, crown and rear of your head.Low-friction slip-plane coating: Alpinestars' patented coating is applied to the EPS liner to permit controlled movement between internal layers during an angled impact, helping to manage rotational acceleration transferred to your head.PLASMA collarbone inserts: Energy-absorbing PLASMA material is integrated into the collarbone recesses, helping to manage contact forces around your shoulders and collarbone during a fall or slide.Collarbone-friendly lower profile: The lower shell includes shaped recesses around the collarbone area, giving you additional clearance when your head moves forwards or sideways during an impact.Aerodynamic shell profile: The outer shape has been developed to guide air around the helmet and manage pressure across its surface, helping you maintain a stable head position during motorway journeys and track riding.Integrated road spoiler: The rear spoiler has been developed through full-scale wind-tunnel testing and computer-aided pressure visualisation, controlling airflow as it leaves the shell to manage turbulence, aerodynamic drag and helmet movement.Integrated lateral winglets: Winglets formed into the outer structure influence airflow around the sides and rear of the helmet, supporting stability when you turn your head or change your riding position.220-degree peripheral vision: The optimised eye port gives you a 220-degree horizontal field of vision, helping you monitor surrounding traffic, track markers and movement at the edges of your view.57-degree vertical vision: The eye-port shape provides a 57-degree vertical field of vision, allowing you to see ahead from an upright road position or a tucked track position without forcing your head into an unnatural angle.Optical Class 1 shield: The shield meets Optical Class 1 requirements and uses controlled optical properties across its surface, giving you a clear view with minimal visual distortion during regular and high-speed riding.Variable-thickness shield: The shield measures 1.6 mm at the sides and increases to 2.6 mm through the centre, giving the central viewing area additional structure while maintaining suitable flexibility around the mounting points.Double-sided anti-scratch treatment: Protective treatment is applied to the inner and outer surfaces of the shield, helping you maintain clear vision through routine cleaning and regular exposure to dust, insects and road debris.Pinlock 120XLT compatibility: Integrated shield pins accept a Pinlock 120XLT 100% Max Vision insert, allowing you to fit a broad anti-fog layer that supports clear vision in cold, wet or humid conditions.Polymer shield-locking lever: A reinforced polymer lever secures the shield in its closed position, helping to prevent unwanted opening when the helmet is exposed to airflow or impact forces.Frontal metal locking hook: The shield lock engages with a metal hook at the front of the helmet, giving you a positive closing point and helping the shield remain attached during an impact.Tool-free shield-release system: Secure side mechanisms allow you to remove and refit the shield without tools, making shield replacement, cleaning and access to the eye-port seal straightforward.Shield-sealing movement: The side mechanisms guide the shield through a rotating and inward movement as it closes, pressing it against the rubber window trim to help keep out rain, draughts and road debris.A-Head Fitment System: Alpinestars' patented micro-adjustable system connects directly to the EPS liner and lets you alter the helmet's height, depth and fore-and-aft angle, helping you position the eye port, crown support and internal padding around your head.Ten-port ventilation layout: Six intake ports and four exhaust ports create defined airflow paths through the helmet, helping you control heat and moisture during everyday journeys and track sessions.Three chinguard intake ports: Three front openings introduce fresh air around your mouth and the inner shield area, helping you manage warmth and moisture inside the front of the helmet.Three upper intake ports: The upper ventilation system feeds air into internal channels across the crown, helping you maintain airflow around the top of your head during extended use.Adjustable chin vents: Two closable front vents direct airflow towards the inner shield surface, helping to manage condensation when temperatures and weather conditions change.Central chin intake: A closable intake beneath the shield lock directs an additional stream of air towards the inner shield and uses a removable rubber bung to let you configure the opening.Sliding top-vent control: A movable upper section reveals three internal air channels when opened, allowing you to regulate airflow through the crown without removing the helmet.Twin chin-bar extractor vents: Two lateral exhaust ports remove warm, humid air from the front of the helmet, helping to control moisture around your mouth and shield.Twin rear extractor vents: Two outlets integrated into the rear spoiler draw heated air from the internal channels, supporting continuous airflow from the front and top intakes to the rear of the helmet.Three-dimensional cheek pads: Contoured foam cheek pads follow the shape of your face to support the helmet's position, spread contact pressure and maintain a secure fit during head movement.Emergency Release System: Clearly defined release points within the cheek pads allow trained assistance to remove the padding before helmet removal, supporting controlled access to your head following an accident.Integrated eyewear channels: Shaped channels within the cheek pads provide space for spectacle arms, helping you position your glasses without concentrated pressure against the sides of your head.Hydration-tube channel: An internal passage accommodates a hydration tube, allowing you to route a compatible drinking system through the helmet during suitable track or endurance use.Removable comfort lining: The internal lining and cheek pads can be removed for washing, helping you clear away perspiration, oils and everyday dirt during routine helmet care.Antimicrobial fabric treatment: Treated lining materials help manage the build-up of odour-causing microorganisms, supporting a clean and comfortable interior through regular use.ECE 22.06 homologation: The helmet and shield are approved under the ECE 22.06 standard, giving you certified protection for legal motorcycle use on UK roads.The S-R7 helps you maintain secure head support, controlled ventilation and a broad field of vision across everyday journeys, motorway riding and track sessions. Its adjustable internal fit and removable lining allow you to set up and maintain the helmet around regular use, while the graphic finish adds a detailed visual design to your riding kit. Its certified construction, practical adjustment systems and serviceable interior make it a smart choice for your motorcycle equipment.

Price now:

£539.99
View Cheapest Offer £539.99

Price History:

Details:

Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white

The Alpinestars S-R7 Graphic Motorcycle Helmet provides full-face head protection for road journeys and track riding. Its pre-preg multi-composite shell, size-specific multi-density EPS liner, patented impact-management technologies, aerodynamic profile and adjustable ventilation system give you a secure fit, controlled airflow and clear visibility.The following features explain how the helmet's construction supports your protection, comfort and concentration:Pre-preg multi-composite shell: Layers of carbon fibre, aramid fibre and fibreglass are pre-impregnated with epoxy resin before being formed into the shell, creating a consistent material structure that gives you penetration resistance, radial strength and controlled energy distribution.Carbon fibre construction: Carbon fibres provide high tensile strength within the shell structure, helping the helmet manage impact loads while maintaining a size-medium weight of approximately 1,390 g.Aramid fibre reinforcement: Aramid fibres are incorporated into the composite lay-up to support tear resistance and help maintain the shell's structural integrity when exposed to concentrated impact forces.Fibreglass shell layers: Fibreglass sections add controlled flexibility to the shell, allowing impact energy to spread across the outer structure before reaching the internal EPS liner.Size-specific outer shells: The shell dimensions are matched to the relevant helmet sizes, helping you achieve suitable external proportions, internal padding thickness and weight distribution around your head.Seven-piece EPS liner: The impact liner consists of seven individual EPS sections arranged around the helmet, allowing each area to perform a defined role in absorbing and distributing impact energy.Six-density EPS construction: Six different EPS densities are positioned according to the expected impact loads in each area, giving you targeted energy absorption around the front, sides, crown and rear of your head.Low-friction slip-plane coating: Alpinestars' patented coating is applied to the EPS liner to permit controlled movement between internal layers during an angled impact, helping to manage rotational acceleration transferred to your head.PLASMA collarbone inserts: Energy-absorbing PLASMA material is integrated into the collarbone recesses, helping to manage contact forces around your shoulders and collarbone during a fall or slide.Collarbone-friendly lower profile: The lower shell includes shaped recesses around the collarbone area, giving you additional clearance when your head moves forwards or sideways during an impact.Aerodynamic shell profile: The outer shape has been developed to guide air around the helmet and manage pressure across its surface, helping you maintain a stable head position during motorway journeys and track riding.Integrated road spoiler: The rear spoiler has been developed through full-scale wind-tunnel testing and computer-aided pressure visualisation, controlling airflow as it leaves the shell to manage turbulence, aerodynamic drag and helmet movement.Integrated lateral winglets: Winglets formed into the outer structure influence airflow around the sides and rear of the helmet, supporting stability when you turn your head or change your riding position.220-degree peripheral vision: The optimised eye port gives you a 220-degree horizontal field of vision, helping you monitor surrounding traffic, track markers and movement at the edges of your view.57-degree vertical vision: The eye-port shape provides a 57-degree vertical field of vision, allowing you to see ahead from an upright road position or a tucked track position without forcing your head into an unnatural angle.Optical Class 1 shield: The shield meets Optical Class 1 requirements and uses controlled optical properties across its surface, giving you a clear view with minimal visual distortion during regular and high-speed riding.Variable-thickness shield: The shield measures 1.6 mm at the sides and increases to 2.6 mm through the centre, giving the central viewing area additional structure while maintaining suitable flexibility around the mounting points.Double-sided anti-scratch treatment: Protective treatment is applied to the inner and outer surfaces of the shield, helping you maintain clear vision through routine cleaning and regular exposure to dust, insects and road debris.Pinlock 120XLT compatibility: Integrated shield pins accept a Pinlock 120XLT 100% Max Vision insert, allowing you to fit a broad anti-fog layer that supports clear vision in cold, wet or humid conditions.Polymer shield-locking lever: A reinforced polymer lever secures the shield in its closed position, helping to prevent unwanted opening when the helmet is exposed to airflow or impact forces.Frontal metal locking hook: The shield lock engages with a metal hook at the front of the helmet, giving you a positive closing point and helping the shield remain attached during an impact.Tool-free shield-release system: Secure side mechanisms allow you to remove and refit the shield without tools, making shield replacement, cleaning and access to the eye-port seal straightforward.Shield-sealing movement: The side mechanisms guide the shield through a rotating and inward movement as it closes, pressing it against the rubber window trim to help keep out rain, draughts and road debris.A-Head Fitment System: Alpinestars' patented micro-adjustable system connects directly to the EPS liner and lets you alter the helmet's height, depth and fore-and-aft angle, helping you position the eye port, crown support and internal padding around your head.Ten-port ventilation layout: Six intake ports and four exhaust ports create defined airflow paths through the helmet, helping you control heat and moisture during everyday journeys and track sessions.Three chinguard intake ports: Three front openings introduce fresh air around your mouth and the inner shield area, helping you manage warmth and moisture inside the front of the helmet.Three upper intake ports: The upper ventilation system feeds air into internal channels across the crown, helping you maintain airflow around the top of your head during extended use.Adjustable chin vents: Two closable front vents direct airflow towards the inner shield surface, helping to manage condensation when temperatures and weather conditions change.Central chin intake: A closable intake beneath the shield lock directs an additional stream of air towards the inner shield and uses a removable rubber bung to let you configure the opening.Sliding top-vent control: A movable upper section reveals three internal air channels when opened, allowing you to regulate airflow through the crown without removing the helmet.Twin chin-bar extractor vents: Two lateral exhaust ports remove warm, humid air from the front of the helmet, helping to control moisture around your mouth and shield.Twin rear extractor vents: Two outlets integrated into the rear spoiler draw heated air from the internal channels, supporting continuous airflow from the front and top intakes to the rear of the helmet.Three-dimensional cheek pads: Contoured foam cheek pads follow the shape of your face to support the helmet's position, spread contact pressure and maintain a secure fit during head movement.Emergency Release System: Clearly defined release points within the cheek pads allow trained assistance to remove the padding before helmet removal, supporting controlled access to your head following an accident.Integrated eyewear channels: Shaped channels within the cheek pads provide space for spectacle arms, helping you position your glasses without concentrated pressure against the sides of your head.Hydration-tube channel: An internal passage accommodates a hydration tube, allowing you to route a compatible drinking system through the helmet during suitable track or endurance use.Removable comfort lining: The internal lining and cheek pads can be removed for washing, helping you clear away perspiration, oils and everyday dirt during routine helmet care.Antimicrobial fabric treatment: Treated lining materials help manage the build-up of odour-causing microorganisms, supporting a clean and comfortable interior through regular use.ECE 22.06 homologation: The helmet and shield are approved under the ECE 22.06 standard, giving you certified protection for legal motorcycle use on UK roads.The S-R7 helps you maintain secure head support, controlled ventilation and a broad field of vision across everyday journeys, motorway riding and track sessions. Its adjustable internal fit and removable lining allow you to set up and maintain the helmet around regular use, while the graphic finish adds a detailed visual design to your riding kit. Its certified construction, practical adjustment systems and serviceable interior make it a smart choice for your motorcycle equipment.

Price now:

£539.99
Top Picks

Demon Tweeks

New

£539.99

£7.94 Delivery

Alpinestars UK

New

£539.99

Free Delivery

This site contains affiliate links for which we may be compensated.

Alpinestars S-R7 Graphic Motorcycle Helmet - A-Core Gloss Red / White, L (59-60cm), Red/white

Demon Tweeks

5.26% (+ £27.00)

New

£539.99

Go to Store
Alpinestars Red/White S-R7 A-Core Helmet Glossy

Alpinestars UK

0.00% (~ £0.00)

New

£539.99

£539.99

£7.94 Delivery

Store
£539.99

Free Delivery

Store

Product Description

The Alpinestars S-R7 Graphic Motorcycle Helmet provides full-face head protection for road journeys and track riding. Its pre-preg multi-composite shell, size-specific multi-density EPS liner, patented impact-management technologies, aerodynamic profile and adjustable ventilation system give you a secure fit, controlled airflow and clear visibility.The following features explain how the helmet's construction supports your protection, comfort and concentration:Pre-preg multi-composite shell: Layers of carbon fibre, aramid fibre and fibreglass are pre-impregnated with epoxy resin before being formed into the shell, creating a consistent material structure that gives you penetration resistance, radial strength and controlled energy distribution.Carbon fibre construction: Carbon fibres provide high tensile strength within the shell structure, helping the helmet manage impact loads while maintaining a size-medium weight of approximately 1,390 g.Aramid fibre reinforcement: Aramid fibres are incorporated into the composite lay-up to support tear resistance and help maintain the shell's structural integrity when exposed to concentrated impact forces.Fibreglass shell layers: Fibreglass sections add controlled flexibility to the shell, allowing impact energy to spread across the outer structure before reaching the internal EPS liner.Size-specific outer shells: The shell dimensions are matched to the relevant helmet sizes, helping you achieve suitable external proportions, internal padding thickness and weight distribution around your head.Seven-piece EPS liner: The impact liner consists of seven individual EPS sections arranged around the helmet, allowing each area to perform a defined role in absorbing and distributing impact energy.Six-density EPS construction: Six different EPS densities are positioned according to the expected impact loads in each area, giving you targeted energy absorption around the front, sides, crown and rear of your head.Low-friction slip-plane coating: Alpinestars' patented coating is applied to the EPS liner to permit controlled movement between internal layers during an angled impact, helping to manage rotational acceleration transferred to your head.PLASMA collarbone inserts: Energy-absorbing PLASMA material is integrated into the collarbone recesses, helping to manage contact forces around your shoulders and collarbone during a fall or slide.Collarbone-friendly lower profile: The lower shell includes shaped recesses around the collarbone area, giving you additional clearance when your head moves forwards or sideways during an impact.Aerodynamic shell profile: The outer shape has been developed to guide air around the helmet and manage pressure across its surface, helping you maintain a stable head position during motorway journeys and track riding.Integrated road spoiler: The rear spoiler has been developed through full-scale wind-tunnel testing and computer-aided pressure visualisation, controlling airflow as it leaves the shell to manage turbulence, aerodynamic drag and helmet movement.Integrated lateral winglets: Winglets formed into the outer structure influence airflow around the sides and rear of the helmet, supporting stability when you turn your head or change your riding position.220-degree peripheral vision: The optimised eye port gives you a 220-degree horizontal field of vision, helping you monitor surrounding traffic, track markers and movement at the edges of your view.57-degree vertical vision: The eye-port shape provides a 57-degree vertical field of vision, allowing you to see ahead from an upright road position or a tucked track position without forcing your head into an unnatural angle.Optical Class 1 shield: The shield meets Optical Class 1 requirements and uses controlled optical properties across its surface, giving you a clear view with minimal visual distortion during regular and high-speed riding.Variable-thickness shield: The shield measures 1.6 mm at the sides and increases to 2.6 mm through the centre, giving the central viewing area additional structure while maintaining suitable flexibility around the mounting points.Double-sided anti-scratch treatment: Protective treatment is applied to the inner and outer surfaces of the shield, helping you maintain clear vision through routine cleaning and regular exposure to dust, insects and road debris.Pinlock 120XLT compatibility: Integrated shield pins accept a Pinlock 120XLT 100% Max Vision insert, allowing you to fit a broad anti-fog layer that supports clear vision in cold, wet or humid conditions.Polymer shield-locking lever: A reinforced polymer lever secures the shield in its closed position, helping to prevent unwanted opening when the helmet is exposed to airflow or impact forces.Frontal metal locking hook: The shield lock engages with a metal hook at the front of the helmet, giving you a positive closing point and helping the shield remain attached during an impact.Tool-free shield-release system: Secure side mechanisms allow you to remove and refit the shield without tools, making shield replacement, cleaning and access to the eye-port seal straightforward.Shield-sealing movement: The side mechanisms guide the shield through a rotating and inward movement as it closes, pressing it against the rubber window trim to help keep out rain, draughts and road debris.A-Head Fitment System: Alpinestars' patented micro-adjustable system connects directly to the EPS liner and lets you alter the helmet's height, depth and fore-and-aft angle, helping you position the eye port, crown support and internal padding around your head.Ten-port ventilation layout: Six intake ports and four exhaust ports create defined airflow paths through the helmet, helping you control heat and moisture during everyday journeys and track sessions.Three chinguard intake ports: Three front openings introduce fresh air around your mouth and the inner shield area, helping you manage warmth and moisture inside the front of the helmet.Three upper intake ports: The upper ventilation system feeds air into internal channels across the crown, helping you maintain airflow around the top of your head during extended use.Adjustable chin vents: Two closable front vents direct airflow towards the inner shield surface, helping to manage condensation when temperatures and weather conditions change.Central chin intake: A closable intake beneath the shield lock directs an additional stream of air towards the inner shield and uses a removable rubber bung to let you configure the opening.Sliding top-vent control: A movable upper section reveals three internal air channels when opened, allowing you to regulate airflow through the crown without removing the helmet.Twin chin-bar extractor vents: Two lateral exhaust ports remove warm, humid air from the front of the helmet, helping to control moisture around your mouth and shield.Twin rear extractor vents: Two outlets integrated into the rear spoiler draw heated air from the internal channels, supporting continuous airflow from the front and top intakes to the rear of the helmet.Three-dimensional cheek pads: Contoured foam cheek pads follow the shape of your face to support the helmet's position, spread contact pressure and maintain a secure fit during head movement.Emergency Release System: Clearly defined release points within the cheek pads allow trained assistance to remove the padding before helmet removal, supporting controlled access to your head following an accident.Integrated eyewear channels: Shaped channels within the cheek pads provide space for spectacle arms, helping you position your glasses without concentrated pressure against the sides of your head.Hydration-tube channel: An internal passage accommodates a hydration tube, allowing you to route a compatible drinking system through the helmet during suitable track or endurance use.Removable comfort lining: The internal lining and cheek pads can be removed for washing, helping you clear away perspiration, oils and everyday dirt during routine helmet care.Antimicrobial fabric treatment: Treated lining materials help manage the build-up of odour-causing microorganisms, supporting a clean and comfortable interior through regular use.ECE 22.06 homologation: The helmet and shield are approved under the ECE 22.06 standard, giving you certified protection for legal motorcycle use on UK roads.The S-R7 helps you maintain secure head support, controlled ventilation and a broad field of vision across everyday journeys, motorway riding and track sessions. Its adjustable internal fit and removable lining allow you to set up and maintain the helmet around regular use, while the graphic finish adds a detailed visual design to your riding kit. Its certified construction, practical adjustment systems and serviceable interior make it a smart choice for your motorcycle equipment.

Product Specifications

General

Color

red/white

Material

aramid

Size

medium

Brand

alpinestars

Age group

Adult

View Cheapest Offer £539.99

Share:

Delivery, Returns & Refunds
Delivery

Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.

Returns

Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.

Refunds

Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.

We use cookies to make the site easier to use. Read our cookie policy.